
Tacusil® S20010 is an adhesion promoter, which can improve effectively promote the adhesion between organic polymers and Nylon, PC, ABS as well as PVC. Using with our company's moisture-curing hot melt cement, various dissimilar materials can be bonded.

Personal protective equipment:
General protective and hygienic measures:
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing. Wash hands before breaks and at the end of work.
- Avoid contact with the eyes and skin.

Tacusil® S20019 is a release agent where a non-transferring release is necessary. This semi-permanent, non-migratory release system chemically bonds to the mold surface to form a micro thin film which is stable at temperatures exceeding most molding processes Tacusil® S20019 can be used for the release of epoxies, polyester resins, thermoplastics, adhesives, and rotationally molded plastics.

Tacusil® SIA0015 is a two-part thermally conductivity silicone base potting material. It can completely cure at room temperature to a flexible polymer with very low hardness and stress in the curing process. It contains abrasive aluminum oxide filler which introduces wear considerations for wetted components and designed for the big volume potting and provides very good resistance to chemicals.


Avoid breathing in steam or smoke. Contact with skin, eyes and clothing.
Store in original container. Keep the container closed and store in dry, cool and well ventilated place. Freezing will affect the physical properties of the product without damaging the properties of the material itself. Defrost and mix well before use.

Tacusil® U10030 light hardening resin is specially developed for fixing and bonding plastic materials like ABS, HIPS, PS, PC, PVC, acryl and so on. When the thin layer is bonded, the resin is transparent and clear. Under the irradiation of visible light, the resin reacts rapidly and can be integrated with the substrate to produce excellent adhesion strength.

Store in a cool place away from the fire, avoid direct sunlight, rain and sudden temperature difference. After opening the tank, avoid sunshine and keep the air circulation in the operation place. Please close the cover when not in use.

Tacusil® U10032 is a light curing resin developed for fixing and bonding PC and PC plastic substrates. Its good surface dryness is also applicable for plastic surface coating. Under the irradiation of ultraviolet light, the resin reacts rapidly and integrates with the substrate, providing excellent adhesion strength.

Tacusil® U10045 is a photo-curing adhesive designed for the bonding of ABS, HIPS, PS, PC, PVC, Acrylate, and more. When applied as thin films, this resin is highly transparent. This product can cure rapidly under the visible light. Additionally, this resin exhibits good water-resistance.