
Tacusil® EPA0135M is one-part heat cure 100% solids epoxy adhesive. It's flowable and long work time under room temperature and designed for bonding applications with high temperature resistance and impact resistance requirements. It also has excellent dielectric strength and adhesion to versatile substrates, such as metals, ceramic and some engineering plastics.

Tacusil® EPA0139-2 is a two-part, low viscosity epoxy casting resin. It's a general purpose, 4:1 by weight mix ratio formulated resin with medium exotherm. It's updated version of EPA0139 in longer work time and cures under room temperature within 24hours, it exhibits good bonding strength to lots of substrates and excellent chemical resistance to many kinds of solvents.

Tacusil® EPA0145 is a two-part general purpose potting epoxy. It has good adhesion to versatile substrates and good resistance to chemical solvents and mechanical impact. It also has long time weather resistance and can supply excellent protection to PCBA and electronical components. This adhesive has a white version.


Tacusil® EPA0168 a single component epoxy with long room temperature pot life. It can cure at relatively low temperatures such as 65 °C (20-30 minutes typically) and can cure very quickly at high temperatures such as 90 °C (3-4 minutes typically).

Tacusil® EPA0180 is a two-part very low viscosity general purpose epoxy potting. It's a translucent potting system with adjustable light transmittance and designed for some component potting with special light transmittance. It also has excellent weather resistance, chemical resistance and good adhesin to versatile substrates.

Tacusil® EPA0181LV is one-part heat cure high build 100% solids epoxy adhesive with high thermal conductivity. This adhesive is designed for application where has requirement for high thermal conductivity, high strength, low shrinkage and CTE. It has good adhesion to versatile substrates, such as metal, ceramic and some engineering plastics.

Tacusil® EPA0183 is one-part heat cure 100% solids epoxy adhesive. It's flowable and long work time under room temperature and designed for small area potting application with high temperature resistance and impact resistance requirement. The potted parts can pass 4 times reflow oven and HTHM test (0.6mm thickness 85C + RH85% environment for 1000 hours).

Tacusil® S20009 is an adhesion promoter, which can improve effectively promote the adhesion between organic polymers and PP, PE as well as PA. Using with our company's moisture-curing cement, various dissimilar materials can be bonded.

Avoid breathing in steam or smoke. Contact with skin, eyes and clothing.
Store in original container. Keep the container closed and store in dry, cool and well ventilated place. Freezing will affect the physical properties of the product without damaging the properties of the material itself. Defrost and mix well before use.