Tacusil® silicones are moisture-curing adhesives, which are specifically designed for ABS and ceramics. These silicones adhere well to a wide spectrum of plastics (PMMA, PVC, PET NYLON), metals and glass and create an elastic bond. Dealcoholized, neutral resins in these silicones are able to reduce corrosion to substrates to the lowest possible level. Odor-free and environmental-friendly, they are used in a variety of applications.
|
Short Description |
Viscosity,cP |
Specific Gravity |
Hardness |
Operating Temperature Range,℃ |
TDS |
|
very soft thermally stable silicone gel |
690 |
0.97 |
78 |
-60-200 |
|
Tacusil® 810028 is a one-part, heat cure, very soft thermally stable silicone gel. It was designed to have excellent thermal stability over a broad temperature range. 810028 will cure very quickly to a soft, low modulus, colorless gel that will have dependability in various applications over a wide range of temperatures. Applications include power and automotive electronics as well as industrial sensor and actuator applications. 810028 will have long lasting performance as a potting material and will also offer reliable environmental protection against damaging environmental conditions.
|
moisture-curing cement mainly |
42000-64000 |
1.17 |
30A |
-40-100 |
|
Tacusil® 810036 is a moisture-curing cement mainly developed for rapid hardening requirements. Neutral alcohols which will further the hardening reaction will release after this product's reaction with the moisture in the air. Without any stink of deacidificated silicone or toxicity of NCO in traditional PU during the reaction, this resin is a high polymer material that takes both manufacturing process and safety into account. The adhesive strength of this product to plastics is much superior to that of silicone.
|
good adhesion and flexibility to metals |
80000-160000 |
1.07 |
43A |
-40-100 |
|
Tacusil® 810038 is a tin free version because the EU starts to restrict DBT, we need to find a substitute material. This resin has good adhesion and flexibility to metals, glass and plastics, such as PMMA, PVC, PET, Nylon. This product is alkoxy and neutral resin, and it has minimum erosion to substrates. This resin is environmental, mild, odor-free and easy to use. This product has better adhesion strength than silicone type products. This product is a flexible silicone that is used widely in various areas.
|
fluorescent indicating version |
45000-55000 |
1.05 |
52A |
-40-100 |
|
Tacusil® 810049 is a fluorescent indicating version. The product was taken in response to the EU's introduction of DBT (dibutyltin compounds). This product has good adhesion and flexibility to a wide range of plastics (PC PMMA PVC PET NYLON), metal and glass. The use of a dealcoholized neutral resin may minimize erosion of the material. Environmentally friendly, mild and odorless, easy to use and widely used, it is a kind of elastic modified silicone which can be widely used.
|
moisture curing adhesive |
45000-68000 |
0.98 |
75A |
- |
|
Tacusil® 810051 is moisture curing adhesive. It is used for plastics and glass bonding. This product is neutral condensation type silicone (RTV-1). It is one-part silicone which can fast cure in the atmosphere without mixing. When curing, this resin is different from the traditional PU which contains isocyanate. This polymer material is safe and good for the process. This product has good non-yellowing and reworkable properties. It also exhibits good oil resistance and waterproof. This resin is widely applied in different substrates sealing and bonding.
|
moisture-curing cement mainly |
70000-140000 |
1.14 |
41A |
-40-100 |
|
Tacusil® 810054 is a moisture-curing type, modified silica gel adhesive, a non-tin catalyst version of 810088, a product as a countermeasure in response to the EU's listing and regulation of DBT (Dibutyltin compounds). It has good adhesion and elasticity for a wide range of plastics (PMMA PVC PET NYLON), metal and glass. Erosion to the substrate can be minimized by using dealcoholized neutral resins. Environmentally friendly, mild, no smell, easy to use and has a wide range of uses, Tacusil® 810054 is a kind of elastic modified silica gel which can be widely used.
|
Silane Terminated Polyurethane for plastics |
7000-15000 |
1.17 |
30A |
-40-90 |
|
Tacusil® 810055 is Silane Terminated Polyurethane (STPU) for plastics, metals and glass. This product is cured by the moisture in the air. The curing system of this product is alkoxy. It is not stinky and has fast curing properties. This resin is different from the traditional PU which contains isocyanate. This product has better adhesion strength than silicone type products.
|
moisture-curing cement widely |
70000-105000 |
1.18 |
50A |
-50-200 |
|
Tacusil® 810057 is a moisture-curing cement widely used to cement inorganic material like plastics and glass. This product is a neutral condensed silicon rubber (RTV-1). Single liquid can cure without mixing under atmosphere. Without toxicity of NCO in traditional PU during the reaction, this resin is a high polymer material that takes both manufacturing process and safety into account. This product is resistant to yellowing, and is already widely used to cement gaps in various substrates.
|
moisture-curing cement widely |
72000-100800 |
1.17 |
24A |
-50-200 |
|
Tacusil® 810058 is a moisture-curing cement widely used to cement inorganic material like plastics and glass. This product is a neutral condensed silicon rubber (RTV-1). Single liquid can cure without mixing under atmosphere. Without toxicity of NCO in traditional PU during the reaction, this resin is a high polymer material that takes both manufacturing process and safety into account. This product is resistant to yellowing, and is already widely used to cement gaps in various substrates.
|
primarily a moisture-curing adhesive |
8000-12000 |
1.04 |
30A |
-40-100 |
|
Tacusil® 810059 is a moisture-curing MS resin (STPU) that is primarily a moisture-curing adhesive developed for rapid hardening needs. This product releases neutral alcohols after reaction with moisture in the air, further producing a hardening reaction. The resin does not have the malodor of the deacidified silicon and the toxicity of the isocyanate (NCO) in the conventional polyurethane. It is a polymer material that combines process and safety. This product has a much stronger bonding strength to plastic than Silicone.
|
STPU for plastics, metals and glass |
30000-50000 |
1.08 |
43A |
-40-100 |
|
Tacusil® 810088 is STPU (Silane Terminated Polyurethane) for plastics, metals and glass. This product is cured by the moisture in the air. The curing system of this product is alkoxy. It is not stinky and has fast curing properties. This resin is different from the traditional PU which contains isocyanate. This product has better adhesion strength than silicone type products.
|
moisture curing STPU for plastics, metals and glass |
37000-56000 |
1.17 |
47A |
-40-100 |
|
Tacusil® 810089 is a moisture curing STPU (Silane Terminated Polyurethane) for plastics, metals and glass. The curing system of this product is alkoxy. It is not stinky and has fast curing properties. This resin is different from the traditional PU which contains isocyanate. This product has better adhesion strength than silicone type products.
|
moisture-curing cement mainly developed for ABS |
60000-120000 |
1.55 |
81A |
-40-120 |
|
Tacusil® 810099 is a moisture-curing cement mainly developed for ABS and porcelain. Neutral alcohols which will further the hardening reaction will release after this product's reaction with the moisture in the air. Without any stink of deacidificated silicone or toxicity of NCO in traditional PU during the reaction, this resin is a high polymer material that takes both manufacturing process and safety into account. The adhesive strength of this product to plastics is much superior to that of silicone.
|
two-part thermally conductivity silicone |
5000 |
2.9 |
75 |
-40~200 |
|
Tacusil® SIA0015 is a two-part thermally conductivity silicone base potting material. It can completely cure at room temperature to a flexible polymer with very low hardness and stress in the curing process. It contains abrasive aluminum oxide filler which introduces wear considerations for wetted components and designed for the big volume potting and provides very good resistance to chemicals, solvent, acids and water etc.
|
two-part thermally conductivity silicone |
135000 |
2.9 |
75 |
-40~200 |
|
Tacusil® SIA0030 is a two-part thermally conductivity silicone base gap filler and special design for EV battery package heat sink. It can completely cure at room temperature to a flexible polymer with very low hardness and stress in the curing process. It contains abrasive aluminum oxide filler which introduces wear considerations for wetted components and designed for the big volume potting and provides very good resistance to chemicals, solvent, acids and water etc.