Tacusil® U20051 is a soft light hardening resin developed for fixing and cementing glass and plastic. Tests have found that its effect on cementing plastic materials is also good. It can harden rapidly under the irradiation of ultraviolet light and provide excellent adhesion strength. Quality control can be done online before exposure to light to adjust to the correct positions.
Tacusil® UVA0202 is a semi-flowable paste with thixotropy, fast curing urethane acrylate that bonds well to engineered plastics and metal based substrates. This product requires direct UV exposure during cure. Because of the variability of different UV light sources it is suggested that the user test and specify UV intensity and exposure time.
Tacusil® UVA0202HV is a High viscosity version of of Tacusil® UVA0202. It's fast curing urethane acrylate that bonds well to engineered plastics and metal based substrates. This product requires direct UV exposure during cure. Because of the variability of different UV light sources it is suggested that the user test and specify UV intensity and exposure time.
Tacusil® UVA0202LV is a low viscosity version of of Tacusil® UVA0202. It's fast curing urethane acrylate that bonds well to engineered plastics and metal based substrates. This product requires direct UV exposure during cure. Because of the variability of different UV light sources it is suggested that the user test and specify UV intensity and exposure time.
Tacusil® UVA0207 is a medium viscosity, fast curing urethane acrylate that bonds well to engineered plastics and metal based substrates. This product requires direct UV exposure during cure. Because of the variability of different UV light sources, it is suggested that the user test and specify UV intensity and exposure time. Short wave length UV light as 260nm will reduce its surface tacky.
Tacusil® UVA0209 is high viscosity, fast curing urethane acrylate that bonds well to engineered plastics and metal based substrates. This product requires direct UV exposure during cure and needs to moisture cure under ambient for 24 hours to get better bonding strength and performance. For the application with shadow area, this material also can get full cure without UV.
Tacusil® V20014 Contact Adhesive (Low VOC) has been developed for non-toluene based on polychloroprene adhesive with special resin to promote strong bonding. It is the most suitable for bonding a wide range of materials and easy for application. V20014 is short tack retention time and suitable for EVA, rubber, and many materials that is difficult to bond.
Store in a cool place away from the fire, avoid direct sunlight, rain and sudden temperature difference.
After opening the tank, avoid sunlight, and keep the air circulation at the operation place closed when not in use.
Personal protective equipment:
General protective and hygienic measures:
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing. Wash hands before breaks and at the end of work.
- Avoid contact with the eyes and skin.
Tacusil® V20015 primer is designed to match the moisture-hardening series products and is applicable for the first coating of not only rubber but also stainless steel, TPU, PC, ABS and nylon. This product can be applied to rubber or plastic metals by spraying and painting.